2022 Anderson Group Co. AFD Series Single Screw A380FD

Information

2022 Anderson Group Co. AFD Series Single Screw A380FD

The Anderson pull type single auger A380 mixer (conveyor discharge) with side trap discharge, will meet todays needs for high output and intensive use. It has been developed for farms where the footprint of the machine is an important factor. These mixers are compact and highly maneuvrable.

Photos

Highlights

  • Norton, New Brunswick
  • 2022
  • Anderson Group Co.
  • AFD Series Single Screw A380FD
  • Available
  • without extension: 106 in (2.69 m)

Specifications

  • 2022
  • Anderson Group Co.
  • AFD Series Single Screw
  • A380FD
  • Wagon
  • Low Speed: 50 hp | High Speed: 75 hp
  • Shaft: 54 in (888cm) 0 RPM 1" 3/8 Z6 | 1000 RP m 1" 3/8 Z21
  • Standard planetary model and ratio configuration: 1602 @ 13.4
  • 15.0 / 55-17 26 PLY
  • Auger RPM – Low Speed: 27 RPM | Auger RPM – Standard High speed: 41 RPM | 2 Speed Gear Box and ratio: D732, 1;1,5 54 in (888cm) 0 RPM
  • Required: Min - 10-15 US gal / 37-56 L/m in.
  • Required: 160-200 bar (2300-2900 psi)
  • (grade AR235): 5/8 in
  • Thickness (grade AR235): 1/4 in
  • Driveline security: Shear bolt
  • 6" capacity extension: 112 in (2.84 m) | 12" capacity extension: 118 in (3 m) | 18" capacity extension: 124 in (3.15 m) | Hay retention ring (additional height): 0 in / 3.5 in | Without incline conveyor: 101 in (2.57 m) | With incline conveyor: 117 in (2.97 m) | Incline conveyor chain / belt 3 ft at min.26 angle /max 40: 30-28in at 26º / 28-25in at 40º | Incline conveyor chain / belt 4 ft at min. 26 angle /max 40: 39-41in at 26º / 48-48in at 40º | Incline conveyor chain / belt 5 ft at min. 26 angle /max 40: 46-48in at 26º / 59-59in at 40º | Incline conveyor chain / belt 6 ft at min. 26 angle /max 40: 50-52in at 26º / 65-65in at 40º | Incline conveyor chain / belt 7 ft at min. 26 angle /max 40: 57-59in at 26º / 75-75in at 40º | Incline conveyor chain / belt 8 ft at min. 26 angle /max 40: 61-63in at 26º / 82-82in at 40º | Incline conveyor chain / belt 3 ft at min. 26 angle /max 40: 35-37in at 26º / 42-42in at 40º | Floor ST (E1) / Conveyor FD (E2) to ground: 26 in (0.66 m) | Floor thickness (grade AR235): 3/4 in | Incline conveyor operating angle: 26 @ 39 degrees
  • without extension: 106 in (2.69 m)
  • 217 in (5.51 m)
  • of the wheels: 86" (2.18 m)
  • Utility: 11,020 lbs (4,998 kg)
  • without extension: 380 ft3 (10.8 m3) | 6" capacity extension: 420 ft3 (11.9 m3) | 12" capacity extension: 460 ft3 (13 m3) | 18" capacity extension: 500 ft3 (14.2 m3)
  • Machine (empty) - STD configuration: 9707 lb (4402 kg)
  • Number of load cells: 3 | Scale system: DG500 | Axle: Simple | Number of Auger: 1
  • per auger: 6