2022 Anderson Group Co. AST Series Single Screw A450ST

Information

2022 Anderson Group Co. AST Series Single Screw A450ST

A450dt (side trap discharge)

Capacity from 450 ft3 (12.8 m3) to 600 ft3 (17 m3)

HP PTO Requirement: in low speed: minimum 60 HP in high speed: minimum 85 HP

Height of 112 in (2.84 m) to 130 in (3.3 m) with extension

Unloading the material by side trap or front conveyor

1 auger with 12 reversible knives in carbide tungsten

Photos

Highlights

  • Norton, New Brunswick
  • 2022
  • Anderson Group Co.
  • AST Series Single Screw A450ST
  • Available
  • without extension: 112 in (2.84 m)

Specifications

  • 2022
  • Anderson Group Co.
  • AST Series Single Screw
  • A450ST
  • Wagon
  • Low Speed: 60 hp | High Speed: 85 hp
  • Shaft: 54 in (888cm) 0 RPM 1" 3/8 Z6 | 1000 RP m 1" 3/8 Z21
  • Standard planetary model and ratio configuration: 1602 @ 13.4
  • 15.0 / 55-17 26 PLY
  • Auger RPM – Low Speed: 27 RPM | Auger RPM – Standard High speed: 41 RPM | 2 Speed Gear Box and ratio: D732, 1;1,5 54 in (888cm) 0 RPM
  • Required: Min - 10-15 US gal / 37-56 L/m in.
  • Required: 160-200 bar (2300-2900 psi)
  • (grade AR235): 5/8 in
  • Thickness (grade AR235): 1/4 in
  • Driveline security: Shear bolt
  • 6" capacity extension: 118 in (3 m) | 12" capacity extension: 124 in (3.15 m) | 18" capacity extension: 130 in (3.3 m) | Hay retention ring (additional height): 0 in / 3.5 in | Without incline conveyor: 112 in (2.84 m) | With incline conveyor: 125 in (3.18 m) | Incline conveyor chain / belt 3 ft at min.26 angle /max 40: 23-16in at 26º / 20-13in at 40º | Incline conveyor chain / belt 4 ft at min. 26 angle /max 40: 40-44in at 26º / 53-53in at 40º | Incline conveyor chain / belt 5 ft at min. 26 angle /max 40: 46-50in at 26º / 63-63in at 40º | Incline conveyor chain / belt 6 ft at min. 26 angle /max 40: 50-54in at 26º / 69-69in at 40º | Incline conveyor chain / belt 7 ft at min. 26 angle /max 40: 56-60in at 26º / 79-79in at 40º | Incline conveyor chain / belt 8 ft at min. 26 angle /max 40: 60-64in at 26º / 85-85in at 40º | Incline conveyor chain / belt 3 ft at min. 26 angle /max 40: 36-40in at 26º / 46-46in at 40º | Floor ST (E1) / Conveyor FD (E2) to ground: 36 in (0.91 m) | Floor thickness (grade AR235): 3/4 in | Incline conveyor operating angle: 26 @ 39 degrees
  • without extension: 112 in (2.84 m)
  • 190 in (4.84 m)
  • of the wheels: 86" (2.18 m)
  • Utility: 13,050 lb (59in (150cm) 18 kg)
  • without extension: 450 ft3 (12.8 m3) | 6" capacity extension: 500 ft3 (14.2 m3) | 12" capacity extension: 550 ft3 (15.6 m3) | 18" capacity extension: 600 ft3 (17 m3)
  • Machine (empty) - STD configuration: 8765 lb (3975 kg)
  • Number of load cells: 3 | Scale system: DG500 | Axle: Simple | Number of Auger: 1
  • per auger: 8