2025 Generac Mobile Industrial Transfer Switches 301-100-400A

Current Generac Mobile Industrial Transfer Switches

Swipe to View More

Year 2025
Make Generac Mobile
Model Industrial Transfer Switches

New to the Generac industrial transfer switch line is the TX Series. The TX Series switches are both Generac designed and built in house with exceptional features that meet, and exceed, any application needs. These transfer switches have some of the highest withstand and closing ratings (WCR) with 3 cycle ratings available. In addition, these switches offer no PPE needed for controller use, firmware updates, or data downloads when the enclosure door is installed.

Dimensions

Height 100A Ser Type 1 (A/B): 51.3 in (1,303 mm) / 47.5 in (1,20 mm) | 100A Ser Type 3R (A/B): 51.3 in (1,303 mm) / 47.5 in (1,20 mm) | 150A Ser Type 1 (A/B): 51.3 in (1,303 mm) / 47.5 in (1,206 mm) | 150A Ser Type 3R (A/B): 51.3 in (1,303 mm)/ 47.5 in (1,206 mm) | 200A Ser Type 1 (A/B): 51.3 in (1,303 mm) / 47.5 in (1,206 mm) | 200A Ser Type 3R (A/B): 51.3 in (1,303 mm)/ 47.5 in (1,206 mm) | 300A Ser Type 1 (A/B): 51.4 in (1,305 mm) / 47.5 in (1,206 mm) | 300A Ser Type 3R (A/B): 51.4 in (1,305 mm)/ 47.5 in (1,206 mm) | 400A Ser Type 1 (A/B): 51.4 in (1,305 mm) / 47.5 in (1,206 mm) | 400A Ser Type 3R (A/B): 51.4 in (1,305 mm)/ 47.5 in (1,206 mm)

Weights

Features

Features Automatic Transfer Switch | 100 – 400 A, up to 480 VAC, 60 Hz, 100% Current Rated | Single or Three Phase | 2, 3, or 4 Poles | UL Type 1 or Type 3R | Open and Inphase or Open with Delayed Transition | ETL Listed to UL 1008 | High Withstand and Closing Ratings | Small Footprint, Results in Easy Mounting and Installation for Reduced Time and Costs | Cable Entry is Top or Bottom (400A Units are Bottom Only) | Double-Throw, Stored Energy Transfer Mechanism | Can be Electrically Isolated while Energized | Graphical LCD-Based Display for Programming, System Diagnostics and Help Menu Display Mimic | Diagram with Source Available and Connected LED Indicator | Method of Transfer: Open with Inphase Transition | Mechanically Interlocked to Prevent Connection of Both Sources | Modbus® RTU Communications | TXC 100 Controller | Operating Temperature -4 ° to 158 °F (-20 ° to 70 °C) | Removable Top and Bottom Plates for Ease of Entry | Voltage Agnostic* | High Withstand and Closing Ratings | Heater Kit Standard on All 3R Enclosures | Auxiliary Output Includes: Two Wire Start, Signal Before Transfer, Fault, and a Programmable Relay Output | Auxiliary Input Includes: Permissive Inputs (24 VDC) | General Alarm Indication | IBC 2018, 2015, 2012, 2009 | Three Phase Under and Over Voltage Sensing on Normal and Emergency Sources | Under and Over Frequency Sensing on Normal and Emergency | Selectable Settings: Single or Three Phase Voltage | Sensing on Normal, Emergency and Load 60 Hz | Phase Sequence Sensing for Phase Sensitive Loads | 2-Wire Start | 3-Wire Start From C Contact for Circuit Monitoring | Signal Before Transfer (Elevator) | General Alarm | Emergency Inhibit (Permissive & Load Shed) | Go to Emergency (Demand Response) | Manual Generator Retransfer | Front Programmable Control Reduces PPE Needs and Arc Flash Hazard | Built in Battery Backup - Increases Switch Reliability and Reduces Switch Transition Time to Alternate Source | Battery Backup Able to Power the Controller for up to 60 Minutes in the Event of No Source Availability | Accessible USB Port for Easy Data Downloads, Firmware Updates without Requiring PPE, Reducing the Risk of Arc Flash | All Amp Nodes Offered with Delayed Transition | Heater Programmable through Control for Desired Temperature and Humidity Settings | Front Accessible Customer Connections | Time-Stamped Event History Log | Programmable Exerciser - Daily, Weekly, Bi-Weekly, Monthly

Warranty

Warranty 2 Year Standard Warranty

2025 Generac Mobile Industrial Transfer Switches 301-100-400A