Current Generac Mobile Stationary Generators

2025 Generac Mobile Stationary Generators MD750-18-1

2025 Generac Mobile Stationary Generators MD750-18-1

Swipe to View More

  • Year 2025
  • Make Generac Mobile
  • Model Stationary Generators
Shop Generac Mobile Pre-Owned
Product Details Specifications Photos
2025 Generac Mobile Stationary Generators MD750-18-1

2025 Generac Mobile Stationary Generators MD750-18-1

  • Year 2025
  • Manufacturer Generac Mobile
  • Model Name Stationary Generators
  • Trim Name MD750-18-1
  • Generic Type (Primary) General
  • Engine Manufacturer Perkins
  • Cylinder Liners 6
  • Engine Type In-Line
  • Displacement 1,105 in3 (18.1 L)
  • Bore 5.71 in (145 mm)
  • Stroke 7.20 in (183 mm)
  • Compression Ratio 14.0:1
  • Intake Design Air Method: Turbocharged/Intercooled
  • Governor Electronic
  • Cooling Type: Pressurized Closed Recovery | Closed Coolant Recovery System | UV/Ozone Resistant Hoses | Factory-Installed Radiator | 50/50 Ethylene Glycol Antifreeze | Radiator Drain Extension
  • Engine Power Horsepower at Rated kW: 1,112 hp | Three-Phase 277/480 VAC @0.8pf: 750 kW / 1,129 Amps | Three-Phase 346/600 VAC @0.8pf: 750 kW / 903 Amps
  • Rated Engine Speed 1,800 RPM

2025 Generac Mobile Stationary Generators MD750-18-1

Our newest addition to the diesel line up, this generator is equipped with PowerZone® Pro Sync controller. This redesigned 750kW now features an on-board paralleling functionality.

Features may include:

GENERATOR ENCLOSURE
  • Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
INDUSTRIAL ALTERNATOR
  • Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
POWERZONE® CONTROLLER
  • Generac engineers its generator controls with safety and convenience as top priorities.

Engine

Engine Manufacturer Perkins
Cylinder Liners 6
Engine Type In-Line
Displacement 1,105 in3 (18.1 L)
Bore 5.71 in (145 mm)
Stroke 7.20 in (183 mm)
Compression Ratio 14.0:1
Intake Design Air Method: Turbocharged/Intercooled
Governor Electronic
Cooling Type: Pressurized Closed Recovery | Closed Coolant Recovery System | UV/Ozone Resistant Hoses | Factory-Installed Radiator | 50/50 Ethylene Glycol Antifreeze | Radiator Drain Extension
Engine Power Horsepower at Rated kW: 1,112 hp | Three-Phase 277/480 VAC @0.8pf: 750 kW / 1,129 Amps | Three-Phase 346/600 VAC @0.8pf: 750 kW / 903 Amps
Rated Engine Speed 1,800 RPM

Fuel System

Fuel Type Ultra Low Sulfur Diesel #2
Fuel System Filtering (Microns): 10 Primary and 2 Secondary | Primary Fuel Filter | Secondary Fuel Filter
Fuel Injection Type: EUI
Fuel Usage, 100% Load 25%: 14.3 gph (54.1 Lph) | 50%: 25.6 gph (97.0 Lph) | 75%: 38.0 gph (143.8 Lph) | 100%: 49.7 gph (188.0 Lph)

Battery

Battery Size: See Battery Index 0161970SBY | Voltage: (4) – 12 VDC
Battery Charger Input Alternator: 50 A

Electric

Electrical System Voltage: 24 VDC | Ground Polarity: Negative
Alternator Standard Model: K0820124Y22 | Poles: 4 | Field Type: Rotating | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% | Telephone Interference Factor (TIF): <50 | Standard Excitation: Permanent Magnet | Bearings: Sealed Ball | Coupling: Direct via Flexible Disc | Voltage Regulator Type: Digital | Regulation Accuracy (Steady State): ±0.25% | UL2200 GENprotect™ | 12 Leads (3-Phase, Non 600V) | Class H Insulation Material | Vented Rotor | 2/3 Pitch | Skewed Stator | Auxiliary Voltage Regulator Power Winding | Amortisseur Winding | Permanent Magnet Excitation | Sealed Bearings | Full Load Capacity Alternator | Protective Thermal Switch | Main Line Circuit Breaker

Operational

Operating Conditions Frequency Regulation (Steady State);: ±0.25%
Operating Speed Fan: 1,800 RPM | Piston: 2,160 ft/min(658 m/min)
Operating Temperature, Maximum Maximum Operating Ambient Temperature: 122 °F (50 °C) | Maximum Operating Ambient Temperature (Before Derate): See Bulletin No. 0199280SSD | Exhaust Temp (Rated Output): 918 °F (492 °C)

Hydraulics

Pump Type Oil: Gear Driven
Oil Filter Type: Full Flow Spin-On Cartridge
Hydraulic Flow Total Fuel Pump Flow (Combustion + Return): 111 gph (420 Lph) | Coolant Flow: 128 gpm (485 Lpm)
Airflow Air Flow (Fan Air Flow Across Radiator) - Open Set: 27,376 scfm (775.2 m3/min) | Flow at Rated Power: 2,507 scfm (71 m3/min) | Exhaust Flow (Rated Output): 6,397 scfm (181 m3/min)
Maximum Pressure Maximum Additional Radiator Backpressure: 0.5 in H2O (0.12 kPa) | BMEP: 443 psi (3,053 kPa) | Maximum Allowable Back Pressure (Post Silencer): 2.95 inHg (9.99 Kpa)

Dimensions

Dimensions Fan Diameter: 45 in (1,143 mm) | Fuel Supply Line: 0.5” NPT (12.7 mm) | Fuel Return Line: 0.5” NPT (12.7 mm) | Fuel Pump Lift-: 12 ft (3.7 m)

Capacities

Oil capacity Crankcase: 71.8 qt (68 L)
Cooling System Coolant Capacity: 27.3 gal (103.3 L)

Features

Features Number of Main Bearings: 7 | Fan Type: Pusher | Oil Drain Extension | Heavy Duty Air Cleaner | Fan Guard | Critical Silencer (Enclosed Units Only) | Factory Filled Oil and Coolant | Radiator Duct Adapter (Open Set Only) | Oil Temperature Indication and Alarrm | Battery Charging Alternator | Battery Cables | Battery Tray | Rubber-Booted Engine Electrical Connections | Solenoid Activated Starter Motor | Internal Genset Vibration Isolation | Separation of Circuits - High/Low Voltage | Separation of Circuits - Multiple Breakers | Wrapped Exhaust Piping (Enclosed Units Only) | Standard Factory Testing | Silencer Mounted in the Discharge Hood (Enclosed Units Only)
Construction Material Cylinder Head Type: Cast Iron | Piston Type: Aluminum | Stainless Steel Flexible Exhaust Connection

Warranty

Warranty 2 Year Limited Warranty (Standby Rated Units) | 1 Year Limited Warranty (Prime Rated Units)

Product Photography