2025 Generac Mobile Stationary Generators MG130
- Year 2025
- Make Generac Mobile
- Model Stationary Generators
2025 Generac Mobile Stationary Generators MG130
2025 Generac Mobile Stationary Generators MG130
Keep all your business’s essentials up and running with a Generac 130kW generator. Take advantage of a durable enclosure that utilizes the highest level of noise reduction and weather resistance. All of our industrial gas generators are completely cost effective and give you the best value for the output so you can afford more of what you need for your business. Generac is one of North America’s largest suppliers of power generation equipment. For more than five decades, Generac has designed and manufactured diesel, natural gas, and bi-fuel generators that meet the demands of any application.
Features may include:
Generator Enclosure- Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
- Generac builds its spark-ignited engines from the block up utilizing advanced engineering expertise.
- Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
- Generac engineers its generator controls with safety and convenience as top priorities.
- Generac's Modular Power Systems (MPS) boast a rate of up to 99.999% reliability, and are more cost-effective and flexible than single generators with the same load capacity.
Engine
Engine Manufacturer
Generac
Cylinder Liners
8
Engine Type
V
Displacement
540 in3 (8.9 L)
Bore
4.49 in (114.23 mm)
Stroke
4.25 in (107.15 mm)
Compression Ratio
G18: 10.5:1 | G26: 9.1:1
Ignition
High Energy
Cooling
Type: Pressurized Closed | Closed Coolant Recovery System | Factory-Installed Radiator | 50/50 Ethylene Glycol Antifreeze | Radiator Drain Extension | UV/Ozone Resistant Hoses
Engine Power
Horsepower at Rated kW (G18/G26): 200 hp / 205 hp | Three-Phase 120/208 VAC @0.8pf: 130 kW / 451 Amps | Three-Phase 120/240 VAC @0.8pf: 130 kW / 391 Amps | Three-Phase 277/480 VAC @0.8pf: 130 kW / 195 Amps | Three-Phase 346/600 VAC @0.8pf: 130 kW / 156 Amps
Intake Design
Intake Air Method: Turbocharged/Aftercooled
Governor
Electronic
Fuel System
Fuel Type
Natural Gas
Fuel System
Carburetor: Down Draft | NPT Fuel Connection on Frame | Primary and Secondary Fuel Shutoff
Fuel Usage, 100% Load
Natural Gas 25%: 635 cfh (18.0 m3/hr) | Natural Gas 50%: 1,005 cfh (28.4 m3/hr) | Natural Gas 75%: 1,401 cfh (39.7 m3/hr) | Natural Gas 100%: 1,797 cfh (50.9 m3/hr) | Propane Vapor 25%: 270 cfh (7.6 m3/hr) | Propane Vapor 50%: 390 cfh (11.0 m3/hr) | Propane Vapor 75%: 516 cfh (14.6 m3/hr) | Propane Vapor 100%: 642 cfh (18.2 m3/hr) | Propane Liquid 25%: 6.5 gal/hr (24.6 l/hr) | Propane Liquid 50%: 10.1 gaL/hr (38.2 l/hr) | Propane Liquid 75%: 14.0 gal/hr (53.0 l/hr) | Propane Liquid 100%: 17.7 gal/hr (67.0 l/hr)
Battery
Battery
Size: See Battery Index 0161970SBY | Voltage: 12 VDC
Battery Charger Input
Alternator: Standard
Electric
Electrical
System Voltage. 12 VDC | Ground Polarity: Negative
Alternator
Standard Model: K0130124Y21 | Poles: 4 | Field Type: Rotating | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% (3-Phase) | Telephone Interference Factor (TIF): <50 | Standard Excitation: Brushless Excitation | Bearings: Single Sealed | Coupling: Direct via Flexible Disc | Voltage Regulator Type: Full Digital | Regulation Accuracy (Steady State): ±0.25% | Main Line Circuit Breaker | UL2200 GENprotect™ Fault Protector | Class H Insulation Materia | 2/3 Pitch | Skewed Stator | Brushless Excitation | Sealed Bearings | Amortisseur Winding
Operational
Operating Conditions
Frequency Regulation (Steady State): ±0.25%
Operating Speed
Fan: 2,330 RPM | Rated Engine: 1,800 RPM | Piston: 1,275 ft/min (389 m/min)
Operating Temperature, Maximum
Max. Operating Ambient Temperature: 122 °F(50 °C) | Maximum Operating Ambient Temperature (Before Derate): See Bulletin No. 0199270SSD | Exhaust Temp (Rated Output - Post Silencer): 1,285 °F (696 °C)
Hydraulics
Pump Type
Oil: Gear
Oil Filter
Type: Full-Flow Spin-On Cartridge
Hydraulic Flow
Coolant Flow: 27.5 gpm (104 Lpm)
Airflow
Air Flow (Fan Air Flow Across Radiator): 5,415 scfm (153.3 m3/min) | Flow at Rated Power: 371 scfm (10.5 m3/min) | Exhaust Flow (Rated Output): 1,199 scfm (34 m3/min)
Maximum Pressure
Operating Fuel Pressure NG/LPV: 7-11 H2O (1.7- 2.7 kPa) | Operating Fuel Pressure LPL: 30 - 312 psi (206 - 2,151 kPa) | Maximum Radiator Backpressure: 0.50 in H2O (0.12 kPa) | BMEP: 166 psi (1145 kPa) | Max. Backpressure (Post Silencer): 0.75 inHg (2.54 kPa)
Dimensions
Dimensions
Fan Diameter: 22 in (558 mm)
Length
Open Set (Includes Exhaust Flex): 110.0 in (2,795 mm) | Weather Protected Enclosure: 132.7 in(3,371 mm) | Level 1 Acoustic Enclosure: 154.1 in (3,915 mm) | Level 2 Acoustic Enclosure: 144.5 in (3,670 mm)
Width
Open Set (Includes Exhaust Flex): 39.9 in (1,013 mm) | Weather Protected Enclosure: 40.5 in (1,028 mm) | Level 1 Acoustic Enclosure: 40.5 in (1,028 mm) | Level 2 Acoustic Enclosure: 40.5 in (1,028 mm)
Height
Open Set (Includes Exhaust Flex): 54.3 in (1,379 mm) | Weather Protected Enclosure: 63.1 in (1,604 mm) | Level 1 Acoustic Enclosure: 63.1 in (1,604 mm) | Level 2 Acoustic Enclosure: 80.0 in (2,031 mm)
Capacities
Oil capacity
Crankcase Capacity with Filters G18: 8.5L (8.0 qts) | Crankcase Capacity with Filters G26: 9.5 L (10.0 qts)
Cooling System
Coolant Capacity: 6.34 gal (24.0 L)
Weights
Weight
Open Set (Includes Exhaust Flex): 2,674 lbs (1,213 kg) | Weather Protected Enclosure Steel: 3,435 lbs (1,558 kg) | Weather Protected Enclosure Aluminum: 3,056 lbs (1,386 kg) | Level 1 Acoustic Enclosure Steel: 3,671 lbs (1,665 kg) | Level 1 Acoustic Enclosure Aluminum: 3,157 lbs (1,432 kg) | Level 2 Acoustic Enclosure Steel: 3,790 lbs (1,719 kg) | Level 2 Acoustic Enclosure Aluminum: 3,208 lbs (1,455 kg)
Features
Features
Number of Main Bearings: 5 | Lifter Type: Hydraulic Roller | Fan Type: Pusher | Oil Drain Extension | Air Cleaner | Fan Guard | Factory Filled Oil & Coolant | Radiator Duct Adapter (Open Set Only) | Critical Exhaust Silencer/Catalyst | Battery Charging AlternatorBattery Cables | Battery Tray | Rubber-Booted Engine Electrical Connections | Solenoid Activated Starter Motor | Internal Genset Vibration Isolation | Separation of Circuits - High/Low Voltage | Separation of Circuits - Multiple Breakers | Wrapped Exhaust Piping (Enclosed Units Only) | Standard Factory Testing | Capable to Accept Full Load in <10 Seconds | Silencer Mounted in the Discharge Hood (Enclosed Units Only)
Construction Material
Cylinder Head: Forged Steel | Piston Type: Aluminum Alloy | Crankshaft Type: Forged Steel | Intake Valve Material: Steel Alloy | Exhaust Valve Material: Stainless Steel | Stainless Steel Flexible Exhaust Connection
Warranty
Warranty
2 Year Limited Warranty (Standby Rated Units)