2025 Generac Mobile Stationary Generators SD015

Information

2025 Generac Mobile Stationary Generators SD015

When computers, cash registers, refrigeration units, and more go down in a power outage, it can adversely impact your ability to stay in business. An investment in our responsive diesel generators protects your product, data, and equipment investment.

Features may include:

GENERATOR ENCLOSURE
  • Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
INDUSTRIAL ALTERNATOR
  • Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
POWER ZONE® 410 CONTROLLER
  • Generac engineers its generator controls with safety and convenience as top priorities.

Photos

Highlights

  • Norton, New Brunswick
  • 2025
  • Generac Mobile
  • Stationary Generators SD015
  • Ultra Low Sulfur Diesel Fuel | Specificiations: ASTM
  • Available

Specifications

  • 2025
  • Generac Mobile
  • Stationary Generators
  • SD015
  • General
  • Perkins
  • EPA Emissions Compliance: Stationary Emergency | EPA Emissions Reference: See Emission Data Sheet
  • 4
  • In-line
  • 135 in3 (2.22 L)
  • 3.3 in (84 mm)
  • 3.9 in (100 mm)
  • 23.3:1
  • System Type: Closed Recovery | Closed Coolant Recovery System | UV/Ozone Resistant Hoses | Factory-Installed Radiator | 50/50 Ethylene Glycol Antifreeze | Radiator Drain Extension
  • at Rated kW: 24.4 hp | Single-Phase 120/240 VAC @1.0pf: 15 kW / 63 Amps| Three-Phase 120/208 VAC @0.8pf : 15 kW /52 Amps | Three-Phase 120/240 VAC @0.8pf: 15 kW / 45 Amps | Three-Phase 277/480 VAC @0.8pf: 15 kW / 23 Amps | Three-Phase 346/600 VAC @0.8pf: 15 kW / 18 Amps
  • Electronic
  • Intake Air Method: Turbocharged/Aftercooled
  • Filtering (Microns): 5 | Fuel Lockoff Solenoid | Primary Fuel Filter
  • Ultra Low Sulfur Diesel Fuel | Specificiations: ASTM
  • Type: Indirect
  • Diesel 100%: 1.3 gph (5.0 Lph) | Diesel 75%: 1.1 gph (4.2 Lph) | Diesel 50%: 1.0 gph (3.8 Lph) | Diesel 25%: 0.9 gph (3.4 Lph)
  • Size: See Battery Index 0161970SBY | Voltage: 12 VDC
  • Alternator: Standard
  • System Voltage: 12 VDC | Ground Polarity: Negative | skVA 277/480 VAC 3Ø: 30% | Voltage Dip 120/240 VAC 1Ø: 35% | skVA K0035124Y26: 54 % | Voltage Dip A0035044N26: 74% | skVa K0050124Y26: 70% | Voltage Dip A0050044N26: 74%
  • Standard Model: K0035124Y26 | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% (3-Phase Only) | Telephone Interference Factor (TIF): <50 | Standard Excitation: Synchronous Brushless | Bearings: Single Sealed | Coupling: Direct via Flexible Disc | Voltage Regulator Type: Digital | Regulation Accuracy (Steady State): ±0.25% | UL2200 GENprotect™ | Class H Insulation Material | 2/3 Pitch | Skewed Stator | Brushless Excitation | Sealed Bearings | Rotor Dynamically Spin Balanced | Amortisseur Winding (3-Phase Only) | Full Load Capacity Alternator | Protective Thermal Switch
  • Isochronous Frequency Regulation (Steady State): ±0.5% | Heat Rejection to Coolant: 128,638 BTU/hr (37.7 kW) | Inlet Air: 3,841 cfm (109 m3/min)
  • Fan: 1,980 RPM | Rated Engine: 1,800 RPM | Piston: 1,182 ft/min(360.3 m/min)
  • Maximum Operating Ambient Temperature: 122 °F (50°C) | Maximum Operating Ambient Temperature (Before Derate): See Bulletin No. 0199280SSD | Exhaust Temperature (Rated Output): 513.5 °F (267.5 °C)
  • Oil: Gear Driven | Fuel Inject: Distribution Injection Pump | Fuel: Cassette
  • Type: Full-Flow Cartridge
  • Total Fuel Pump Flow (Combustion + Return): 16.6 gph (63.0 Lph) | Flow at Rated Power: 87.9 scfm (2.5 m3/min) | Exhaust Flow (Rated Output): 158.5 scfm (4.5 m3/min)
  • BMEP: 79.4 psi (547.6 kPa) | Maximum Allowable Exhaust Backpressure (Post Silencer): 3.1 inHg (10.5 kPa) |
  • Fan Diameter: 18.0 in (457.2 mm) | Fuel Supply Line: 0.31 in (7.94 mm ) ID | Fuel Return Line: 0.19 in (4.76 mm) ID | Fuel Pump Lift: 3 ft (1 m)
  • Crankcase: 11.2 qt (10.6 L)
  • Coolant Flow: 14.9 gpm (56.4 Lpm) | Coolant Capacity: 3.3 gal (12.5 L)
  • Fan Type: Pusher | Oil Drain System | Air Filter Restriction Indicator | Air Cleaner | Level 1 Fan and Belt Guards (Open Set Only) | Factory Filled Oil and Coolant | Radiator Duct Adapter (Open Set Only) | Critical Silencer (Enclosed Units Only) | Engine Coolant Heater | Battery Charging Alternator | Battery Cables | Battery Tray | Solenoid Activated Starter Motor | Internal Genset Vibration Isolation | Separation of Circuits - High/Low Voltage | Separation of Circuits - Multiple Breakers | Wrapped Exhaust Piping (Enclosed Units Only) | Standard Factory Testing | Silencer Mounted in the Discharge Hood (Enclosed Units Only)
  • Cylinder Head: Cast Iron | Piston Type. Aluminum | Crankshaft Type: Forged Steel | Stainless Steel Flexible Exhaust Connection | Rubber-Booted Engine Electrical Connections
  • 2 Year Limited Warranty (Standby Rated Units)