2025 Generac Mobile Stationary Generators SD035
- Year 2025
- Make Generac Mobile
- Model Stationary Generators
2025 Generac Mobile Stationary Generators SD035
2025 Generac Mobile Stationary Generators SD035
Alternators are as important to power generation as engines. Generac's in-house built alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency. Available in single-phase or three-phase, the 35kW industrial diesel generator set provides 42-146 amps of power. There are open set, standard enclosure, or Level 1 or 2 acoustic enclosure options. Made with a 4 cylinder engine, it features a Power Zone ® 410 Controller. 35kW generators have the power to backup essential equipment in small industrial or commercial buildings.
Features may include:
GENERATOR ENCLOSURE- Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
- Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
- Generac engineers its generator controls with safety and convenience as top priorities.
Engine
Engine Manufacturer
Mitsubishi
Cylinder Liners
4
Engine Type
In-Line
Displacement
203.3 (3.331 L)
Bore
3.7 in (94 mm)
Stroke
4.72 in (120 mm)
Compression Ratio
19:1
Ignition
CI
Cooling
System Type: Closed Recovery | Closed Coolant Recovery System | UV/Ozone Resistant Hoses | Factory-Installed Radiator | Radiator Drain Extension | 50/50 Ethylene Glycol Antifreeze | 120 VAC Coolant Heater
Engine Power
at Rated kW: 85 hp | Single-Phase 120/240 VAC @1.0pf: 35 kW/35 kVA / 146 Amps | Three-Phase 120/208 VAC @0.8pf :35 kW/44 kVA / 122 Amps | Three-Phase 120/240 VAC @0.8pf: 35 kW/44 kVA / 105 Amps | Three-Phase 277/480 VAC @0.8pf: 35 kW/44 kVA / 53 Amps | Three-Phase 346/600 VAC @0.8pf: 35 kW/44 kVA / 42 Amps
Intake Design
Intake Air Method: Turbocharged/Aftercooled
Governor
Electronic Isochronous
Fuel System
Fuel Type
Ultra Low Sulfur Diesel #2
Fuel System
Filtering (Microns): 10 Primary and 2 Secondary | Fuel Lockoff Solenoid | Primary Fuel Filter
Fuel Injection
Mechanical
Fuel Usage, 100% Load
Diesel 100%: 3.2 gph (12.1 Lph) | Diesel 75%: 2.4 gph (9.1 Lph) | Diesel 50%: 1.6 gph (6.1 Lph) | Diesel 25%: 0.8 hph (3.0 Lph)
Battery
Battery
Size: See Battery Index 0161970SBY | Voltage: 12 VDC
Battery Charger Input
Alternator: 50 A
Electric
Electrical
System Voltage: 12 VDC | Ground Polarity: Negative |
Alternator
Standard Model: K0035124Y21 | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% (3 Phase Only) | Telephone Interference Factor (TIF): <50 | Standard Excitation: Synchronous Brushless | Bearings: Sealed Ball | Coupling: Direct via Flexible Disc | Load Capacity — Standby: 100% | Voltage Regulator Type: Digital | Number of Sensed Phases: All | Regulation Accuracy (Steady State): ±0.25% | UL2200 GENprotect™12 Leads (3-Phase, Non 600V) | Class H Insulation Material | Vented Rotor | 2/3 Pitch | Skewed Stato | Auxiliary Voltage Regulator Power Winding | Brushless Excitation | Sealed Bearing | Automated Manufacturing (Winding, Insertion, Lacing, Varnishing) | Rotor Dynamically Spin Balanced | Amortisseur Winding | Full Load Capacity Alternator | Protective Thermal Switch
Operational
Operating Conditions
Frequency Regulation (Steady State): ±0.25%
Operating Speed
Fan: 2,340 RPM | Rated Engine: 1,800 RPM | Piston: 1,416 ft/min (431.6 m/min)
Operating Temperature, Maximum
Maximum Operating Ambient Temperature: 122 °F(50 °C) | Maximum Operating Ambient Temperature (Before Derate): See Bulletin No. 0199270SSD | Exhaust Temp (Rated Output): 900 °F (482 °C)
Hydraulics
Pump Type
Oil: Gear | Fuel: In-Line
Oil Filter
Type: Full Flow Cartridg
Hydraulic Flow
Total Fuel Pump Flow (Combustion + Return): 3.57 gph (13.51 Lph) | Flow at Rated Power: 90 cfm (2.5 m3/min) | Exhaust Flow (Rated Output): 230 scfm (6.5 m3/min)
Airflow
Air Flow (Fan Air Flow Across Radiator) - Open Set: 2,500 cfm(70.8 m3/hr)
Maximum Pressure
Maximum Additional Radiator Backpressure: 0.5 in H2O (0.1 kPa) | BMEP: 118 psi (814 kPa) | Maximum Allowable Back Pressure (Post Silencer): 1.5 in H2O(5.1 kPa)
Dimensions
Dimensions
Fan Diameter: 20 in (508 mm) | Fuel Supply Line: 0.31 in (7.94 mm) NPT | Fuel Return Line: 0.31 in (7.94 mm) NPT | Fuel Pump Lift: 4.5 ft (m)
Capacities
Oil capacity
Crankcase: 11.2 qt (10.6 L)
Cooling System
Coolant Flow: 34.0 gpm(128.7 Lpm) | Coolant Capacity: 3.0 gal (11.4 L)
Features
Features
Fan Type: Pusher | Oil Drain Extension | Air Cleaner | Level 1 Fan and Belt Guards (Open Set Only) | Factory Filled Oil and Coolant | Radiator Duct Adapter (Open Set Only) | Critical Exhaust Silencer (Enclosed Units Only) | Battery Charging Alternator | Battery Cables | Battery Tray | Solenoid Activated Starter Motor | Internal Genset Vibration Isolation | Separation of Circuits - High/Low Voltage | Separation of Circuits - Multiple Breakers | Wrapped Exhaust Piping | Standard Factory Testing | | Silencer Mounted in the Discharge Hood (Enclosed Units Only) | Silencer of Heat Shield
Construction Material
Cylinder Head: Cast Iron | Piston Type: Aluminum | Stainless Steel Flexible Exhaust Connection | Rubber-Booted Engine Electrical Connections
Warranty
Warranty
2 Year Limited Warranty (Standby Rated Units) | 1 Year Limited Warranty (Prime Rated Units)