Current Generac Mobile Stationary Generators

2025 Generac Mobile Stationary Generators SD100

2025 Generac Mobile Stationary Generators SD100

Swipe to View More

  • Year 2025
  • Make Generac Mobile
  • Model Stationary Generators
Shop Generac Mobile Pre-Owned
Product Details Specifications Photos
2025 Generac Mobile Stationary Generators SD100

2025 Generac Mobile Stationary Generators SD100

  • Year 2025
  • Manufacturer Generac Mobile
  • Model Name Stationary Generators
  • Trim Name SD100
  • Generic Type (Primary) General
  • Engine Manufacturer Iveco/FPT
  • Emissions EPA Emissions Compliance. Stationary Emergency | EPA Emissions Reference: See Emission Data Sheet
  • Cylinder Liners 6
  • Engine Type In-Line
  • Displacement 408.86 in3 (6.7 L)
  • Bore 4.09 in (104 mm)
  • Stroke 5.2 in (128 mm)
  • Compression Ratio 16.5:1
  • Cooling Type: Closed Recovery | Closed Coolant Recovery System | UV/Ozone Resistant Hoses | Factory-Installed Radiator | Radiator Drain Extension | 50/50 Ethylene Glycol Antifreeze
  • Engine Power Horsepower at Rated kW: 152 hp | Single-Phase 120/240 VAC @1.0pf: 100 kW / 417 Amps | Three-Phase 120/208 VAC @0.8pf: 100 kW / 347 Amps | Three-Phase 120/240 VAC @0.8pf: 100 kW / 301 Amps | Three-Phase 277/480 VAC @0.8pf: 100 kW / 150 Amps | Three-Phase 346/600 VAC @0.8pf: 100 kW / 120 Amps
  • Intake Design Intake Method: Turbocharged/Aftercooled
  • Governor Electronic Isochronous

2025 Generac Mobile Stationary Generators SD100

Many components of our diesel generators are built in-house at Generac's world-class facilities, so you are supported by a single-source. This makes service and the occasional trouble-shooting easy for you, as our nationwide network of Industrial Power Distributors stands by you.

Features may include:

GENERATOR ENCLOSURE
  • Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
INDUSTRIAL ALTERNATOR
  • Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
POWERMANAGER® CONTROLLER
  • Generac engineers its small diesel gensets and generator controls with safety and convenience as top priorities.

Engine

Engine Manufacturer Iveco/FPT
Emissions EPA Emissions Compliance. Stationary Emergency | EPA Emissions Reference: See Emission Data Sheet
Cylinder Liners 6
Engine Type In-Line
Displacement 408.86 in3 (6.7 L)
Bore 4.09 in (104 mm)
Stroke 5.2 in (128 mm)
Compression Ratio 16.5:1
Cooling Type: Closed Recovery | Closed Coolant Recovery System | UV/Ozone Resistant Hoses | Factory-Installed Radiator | Radiator Drain Extension | 50/50 Ethylene Glycol Antifreeze
Engine Power Horsepower at Rated kW: 152 hp | Single-Phase 120/240 VAC @1.0pf: 100 kW / 417 Amps | Three-Phase 120/208 VAC @0.8pf: 100 kW / 347 Amps | Three-Phase 120/240 VAC @0.8pf: 100 kW / 301 Amps | Three-Phase 277/480 VAC @0.8pf: 100 kW / 150 Amps | Three-Phase 346/600 VAC @0.8pf: 100 kW / 120 Amps
Intake Design Intake Method: Turbocharged/Aftercooled
Governor Electronic Isochronous

Fuel System

Fuel Type Ultra Low Sulfur Diesel Fuel #2 | Specifications: ASTM
Fuel System Filtering (Microns): 5 | Fuel Lockoff Solenoid | Primary Fuel Filter
Fuel Injection Mechanical
Fuel Usage, 100% Load 25%: 2.2 gph (8.3 Lph) | 50%: 4.2 gph (15.9 Lph) | 75%: 5.9 gph (22.3 Lph) | 7.3 gph (27.6 Lph)

Battery

Battery Size. See Battery Index 0161970SBY | Battery Voltage: 12 VDC
Battery Charger Input Alternator: Standard

Electric

Electrical System Voltage: 12 VDC | Ground Polarity: Negative (-)
Alternator Standard Model: K0100124Y21 | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator. H | Total Harmonic Distortion: <5% (3-Phase Only) | Telephone Interference Factor (TIF): <50 | Standard Excitation: Synchronous Brushless | Bearings: Single Seated Cartridge | Coupling: Direct via Flexible Disc | Voltage Regulator Type. Digital | Regulation Accuracy (Steady State): ±0.25% | UL2200 GENprotect™ | 12 Leads (3-Phase, Non 600V) | Class H Insulation Materia | Vented Rotor | 2/3 Pitch | Skewed Stator | Auxiliary Voltage Regulator Power Winding | Brushless Excitation | Sealed Bearing | Automated Manufacturing (Winding, Insertion, Lacing, Varnishing) | Rotor Dynamically Spin Balanced | Amortisseur Winding | Full Load Capacity Alternator | Protective Thermal Switch

Operational

Operating Conditions Frequency Regulation (Steady State). ±0.25%
Operating Speed Fan: 2,538 RPM | Rated Engine: 1,800 RPM | Piston: 1,559 ft/min (475 m/min)
Operating Temperature, Maximum Maximum Operating Ambient Temperature: 122 °F (50 °C) | Maximum Operating Ambient Temperature (Before Derate): See Bulletin No. 0199280SSD | Exhaust Temperature (Rated Output): 885 °F (474 °C)

Hydraulics

Pump Type Oil: Gear | Water: Belt Driven Centrifugal | Fuel: Engine Driven Gear
Oil Filter Type: Full Flow
Hydraulic Flow Total Fuel Pump Flow (Combustion + Return): 29.1 gph (119.2 Lph) | Coolant Flow: 44.6 gpm (168.8 Lpm)
Airflow Inlet Air: 6,360 cfm (180 m3/min) | Flow at Rated Power: 325 cfm (0.12 m3/min ) | Exhaust Flow (Rated Output): 885 cfm (25 m3/min)
Maximum Pressure Maximum Additional Radiator Backpressure: 0.5 in H2O (0.12 kPa) | BMEP: 165 psi (1,138 kPa) | Maximum Allowable Backpressure (Post Silencer): 1.5 inHg (5.1 kPa)

Dimensions

Dimensions Fan Diameter: 23.6 in (599 mm) | Fuel Supply Line: 0.5 in (12.7 mm) NPT | Fuel Return Line: 0.5 in (12.7 mm) NPT | Fuel Pump Lift: 3 ft (1 m)

Capacities

Oil capacity Engine: 18 qt (17 L)
Cooling System Coolant Capacity: 5.7 gal (21.4 L)

Features

Features Cylinder Head Type: 2-Valve | Fan Type: Pusher | Oil Drain Extension | Heavy Duty Air Cleaner | Level 1 Fan and Belt Guards (Open Set Only) | Factory Filled Oil and Coolant | Radiator Duct Adapter (Open Set Only) | Engine Coolant Heater | Critical Silencer | Battery Charging Alternator | Battery Cables | Battery Tray | Rubber-Booted Engine Electrical Connections | Solenoid Activated Starter Motor | Separation of Circuits - High/Low Voltage | Separation of Circuits - Multiple Breakers | Wrapped Exhaust Piping | Standard Factory Testing | Silencer Mounted in the Discharge Hood (Enclosed Unit Only
Construction Material Piston Type: Aluminum Alloy | Crankshaft Type: Forged Steel | Stainless Steel Flexible Exhaust Connection

Warranty

Warranty 2 Year Limited Warranty (Standby Rated Units) | 1 Year Limited Warranty (Prime Rated Units)

Product Photography