2025 Generac Mobile Stationary Generators SD200

Information

2025 Generac Mobile Stationary Generators SD200

Every area of the country comes with different outage-related challenges and our proven gensets can meet all of them. What's more, if you are in an area where noise can be an issue, we provide sound attenuated enclosures, so you can be a good neighbor.

Features may include:

GENERATOR ENCLOSURE
  • Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
INDUSTRIAL ALTERNATOR
  • Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
POWERMANAGER® CONTROLLER
  • Generac engineers its generator controls with safety and convenience as top priorities.

Photos

Highlights

  • Norton, New Brunswick
  • 2025
  • Generac Mobile
  • Stationary Generators SD200
  • Ultra Low Sulfur Diesel Fuel #2 | Specifications: ASTM
  • Available

Specifications

  • 2025
  • Generac Mobile
  • Stationary Generators
  • SD200
  • General
  • Iveco/FPT
  • EPA Emissions Compliance: Stationary Emergency | EPA Emissions Reference: See Emission Data Sheet
  • 6
  • In-line | Direct Injection
  • 8.7 in3 (530.91 L)
  • 117 in (4.61 mm)
  • 135 in (5.31 mm)
  • 16.5:1
  • Air Method: Turbocharged/Aftercooled
  • Electronic Isochronous
  • Closed | Closed Coolant Recovery System | UV/Ozone Resistant Hoses | Factory-Installed Radiator | Radiator Drain Extension | 50/50 Ethylene Glycol Antifreeze | 120 VAC Coolant Heater
  • Horsepower at Rated kW: 320 hp | Three-Phase 120/208 VAC @0.8p: 200 kW / 833 Amps | Three-Phase 120/208 VAC @0.8pf: 200 kW / 694 Amps | Three-Phase 120/240 VAC @0.8pf: 200 kW / 601 Amps | Three-Phase 277/480 VAC @0.8pf: 200 kW / 301 Amps | Three-Phase 346/600 VAC @0.8pf: 200 kW / 241 Amps
  • 1,800 RPM
  • Filtering (Microns): 5 | Fuel Lockoff Solenoid | Primary Fuel Filter
  • Ultra Low Sulfur Diesel Fuel #2 | Specifications: ASTM
  • Type: Common Rail
  • 25%: 4.4 gph (16.7 Lph) | 50%: 8.3 gph (31.4 Lph) | 75%: 11.9 gph (45 Lph) | 100%: 14.8 gph (56 Lph)
  • Size: See Battery Index 0161970SBY | Voltage: (2) -12 VDC
  • Alternator: Standard
  • System Voltage: 24 VDC | Ground :Polarity Negative
  • Standard Model: Generac 520 mm | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% (3-Phase) | Telephone Interference Factor (TIF): <50 | Standard Excitation: Permanent Magnet Excitation | Bearings: Single Sealed Cartridge | Coupling: Direct via Flexible Disc | Voltage Regulator Type: Digital | Regulation Accuracy (Steady State): ±0.25% | GENprotect™ | 12 Leads (3-Phase, Non 600V) | Class H Insulation Material | Vented Rotor | 2/3 Pitch | Skewed Stator | Auxiliary Voltage Regulator Power Winding | Permanent Magnet Excitation | Sealed Bearings | Automated Manufacturing (Winding, Insertion, Lacing, Varnishing) | Rotor Dynamically Spin Balanced | Amortisseur Winding | Full Load Capacity Alternator | Protective Thermal Switch
  • Frequency Regulation (Steady State): ±0.25% | Heat Rejection to Coolant: 545,646 BTU/hr
  • Fan: 2,538 RPM | Piston: 1,593 ft/min
  • Maximum Operating Ambient Temperature: 120 °F (50 °C) | Maximum Operating Ambient Temperature (Before Derate): See Bulletin No. 0199280SSD | Exhaust Temperature (Rated Output Post Silencer): 920 °F (493 °C)
  • Oil: Gear | Water: Pre-Lubed, Self Sealing | Fuel Inject: Make Electronic | Fuel: Engine Driven Gear
  • Type: Full-Flow
  • Total Fuel Pump Flow (Combustion + Return): 26 gph (98 Lph) | Coolant Flow: 63.3 gpm (240.0 Lpm)
  • Inlet Air: 8,872 cfm (251 m3/hr) | Flow at Rated Power: 595 cfm (16.8 m3/min) | Exhaust Flow (Rated Output): 1,345 cfm (38.1 m3/min)
  • Maximum Radiator Backpressure: 0.5 in H2O (0.12 kPa) | BMEP: 265 psi | Maximum Allowable Backpressure (Post Silencer): 1.5 inHg (5.1 kPa)
  • Fan Diameter: 762 mm (30 in) | Fuel Pump Lift: 3 ft (1 m)
  • Crankcase Oil Capacity: 28.0 L (29.6 qts)
  • Coolant Capacity: 12.7 gal (49.2 L)
  • Cylinder Head: 4–Valve | Fan Type: Pusher | Oil Drain Extension | Air Cleaner | Factory Filled Oil | Radiator Duct Adapter (Open Set Only) | Critical Silencer (Enclosed Only | Battery Charging Alternator | Battery Cables | Battery Tray | Rubber-Booted Engine Electrical Connections | Solenoid Activated Starter Motor | Internal Genset Vibration Isolation | Separation of Circuits - High/Low Voltage | Separation of Circuits - Multiple Breakers | Wrapped Exhaust Piping | Standard Factory Testing | Silencer Mounted in the Discharge Hood (Enclosed Only)
  • Piston Type: Aluminum | Crankshaft Type: Dropped Forged Steel | Stainless Steel Flexible Exhaust Connection
  • 2 Year Extended Limited Warranty (Standby Rated Units) | 1 Year Extended Limited Warranty (Prime Rated Units)