Current Generac Mobile Stationary Generators

2025 Generac Mobile Stationary Generators SDMD1000

2025 Generac Mobile Stationary Generators SDMD1000

Swipe to View More

  • Year 2025
  • Make Generac Mobile
  • Model Stationary Generators
Shop Generac Mobile Pre-Owned
Product Details Specifications Photos
2025 Generac Mobile Stationary Generators SDMD1000

2025 Generac Mobile Stationary Generators SDMD1000

  • Year 2025
  • Manufacturer Generac Mobile
  • Model Name Stationary Generators
  • Trim Name SDMD1000
  • Generic Type (Primary) General
  • Engine Manufacturer Perkins
  • Emissions EPA Emissions Compliance: Tier 2 | EPA Emissions Reference: See Emissions Data Sheet
  • Cylinder Liners 8
  • Engine Type In-Line
  • Displacement 1,865 in3 (30.6 L)
  • Bore 6.3 in (160 mm)
  • Stroke 7.48 in (190 mm)
  • Compression Ratio 14.1
  • Intake Design Air Method: Turbocharged/Intercooled
  • Governor Electronic
  • Cooling Type: Pressurized Closed | Closed Coolant Recovery System | UV/Ozone Resistant Hoses | Factory-Installed Radiator | 50/50 Ethylene Glycol Antifreeze | Radiator Drain Extension
  • Engine Power Horsepower at Rated kW: 1,412 hp | Three-Phase 277/480 VAC @0.8pf: 1,000 kW/1,250 kVA / 1,504 Amps | Three-Phase 346/600 VAC @0.8pf: 1,000 kW/1,250 kVA / 1,203 Amps
  • Rated Engine Speed 1,800 RPM

2025 Generac Mobile Stationary Generators SDMD1000

Every component of our generators is tested in our facility to ensure it meets UL220 standards. But your standards are the only ones that matter. Our diesel technology is proven over decades of performance and our support network is second to none.

Features may include:

GENERATOR ENCLOSURE
  • Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
INDUSTRIAL ALTERNATOR
  • Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
POWERMANAGER® CONTROLLER
  • Generac engineers its generator controls with safety and convenience as top priorities.
GENERATOR PARALLELING
  • Generac's Modular Power Systems (MPS) boast a rate of up to 99.999% reliability, and are more cost-effective and flexible than single generators with the same load capacity.

Engine

Engine Manufacturer Perkins
Emissions EPA Emissions Compliance: Tier 2 | EPA Emissions Reference: See Emissions Data Sheet
Cylinder Liners 8
Engine Type In-Line
Displacement 1,865 in3 (30.6 L)
Bore 6.3 in (160 mm)
Stroke 7.48 in (190 mm)
Compression Ratio 14.1
Intake Design Air Method: Turbocharged/Intercooled
Governor Electronic
Cooling Type: Pressurized Closed | Closed Coolant Recovery System | UV/Ozone Resistant Hoses | Factory-Installed Radiator | 50/50 Ethylene Glycol Antifreeze | Radiator Drain Extension
Engine Power Horsepower at Rated kW: 1,412 hp | Three-Phase 277/480 VAC @0.8pf: 1,000 kW/1,250 kVA / 1,504 Amps | Three-Phase 346/600 VAC @0.8pf: 1,000 kW/1,250 kVA / 1,203 Amps
Rated Engine Speed 1,800 RPM

Fuel System

Fuel Type Ultra Low Sulfur Diesel #2 | Specifications: ASTM
Fuel System Filtering (Microns): 4 | Flexible Fuel Lines | Primary and Secondary Fuel Filter
Fuel Usage, 100% Load 50%: 38.0 gph (144.0 Lph) | 75%: 54.7 gph (207.2 Lph) | 100%: 70.9 gph (268.4 Lph)

Battery

Battery Size: See Battery Index 0161970SBY | Voltage: 12 VDC
Battery Charger Input Alternator: Standard

Electric

Electrical System Voltage: 24 VDC | Ground Polarity: Negative
Alternator Standard Model: K1248064N22 | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% | Telephone Interference Factor (TIF): <50 | Standard Excitation: Permanent Magnet | Bearings: Sealed Ball | Coupling: Direct Drive | Voltage Regulator Type: Digital | Regulation Accuracy (Steady State): ±0.25% | MD-Only: Main Line Circuit Breaker | Class H Insulation Material | 2/3 Pitch | Skewed Stator | Permanent Magnet Excitation | Sealed Bearing | Full Load Capacity Alternator

Operational

Operating Conditions Frequency Regulation (Steady State): ±0.25%
Operating Speed Piston: 2,244 ft/min (684 m/min)
Operating Temperature, Maximum Maximum Operating Ambient Temperature: 122 °F (50 °C) | Maximum Operating Ambient Temperature (Before Derate) See Bulletin No. 0199280SSD | Exhaust Temperature (Rated Output - Post Turbo): 937 °C (503 °C)

Hydraulics

Pump Type Oil: Gear Driven
Oil Filter Type: Full Flow Spin-On Cartridge
Injection Pump Type Fuel: MEUI
Fuel Injection Type: Electronic
Hydraulic Flow Total Fuel Pump Flow (Combustion + Return): 238 gph (900 Lph) | Coolant Flow: 174 gpm (660 Lpm)
Airflow Air Flow (Fan Air Flow Across Radiator): 34,538 cfm (978 m3/min) | Flow at Rated Power: 2,935 cfm (83 m3/min) | Exhaust Flow (Rated Output): 7,097 cfm (201 m3/min)
Maximum Pressure Maximum Additional Radiator Backpressure: 0.8 in H2O (0.2 kPa) | BMEP: 350 psi (2,415 kPa) | Maximum Allowable Back Pressure (Post Turbo): 4.1 inHg (14.0 Kpa)

Dimensions

Dimensions Fan Diameter: 49.2 in (1,250 mm) | Fuel Supply Line O.D. Minimum: 0.59 in (15.0 mm) | Fuel Return Line O.D. Minimum: 0.59 in (15.0 mm) | Fuel Pump Lift: 8.2 ft (2.5 m)

Capacities

Oil capacity Crankcase: 162 qt (153 L)
Cooling System Coolant Capacity: 37 gal (140 L)

Features

Features Cylinder Head: 4-Valve | Fan Type: Pusher | Oil Drain Extension | Air Filter Restriction Indicator | Air Cleaner | Level 1 Fan and Belt Guards (Open Set Only) | Factory Filled Oil and Coolant | Radiator Duct Adapter (Open Set Only) | Engine Coolant Heater | Battery Charging Alternator | Battery Cables | Battery Tray | Solenoid Activated Starter Motor | Separation of Circuits - High/Low Voltage | Separation of Circuits - Multiple Breakers | Standard Factory Testing | Spring Isolator
Construction Material Stainless Steel Flexible Exhaust Connection | Rubber-Booted Engine Electrical Connections

Warranty

Warranty 2 Year Limited Warranty (Standby Rated Units)

Product Photography