Current Generac Mobile Stationary Generators

2025 Generac Mobile Stationary Generators SG060

2025 Generac Mobile Stationary Generators SG060

Swipe to View More

  • Year 2025
  • Make Generac Mobile
  • Model Stationary Generators
Shop Generac Mobile Pre-Owned
Product Details Specifications Photos
2025 Generac Mobile Stationary Generators SG060

2025 Generac Mobile Stationary Generators SG060

  • Year 2025
  • Manufacturer Generac Mobile
  • Model Name Stationary Generators
  • Trim Name SG060
  • Generic Type (Primary) General
  • Engine Manufacturer Generac
  • Cylinder Liners 4
  • Engine Type In-Line
  • Displacement 270.4 in3 (4.43 L)
  • Bore 4.5 in (114.3 mm)
  • Stroke 4.25 in (107.95 mm)
  • Compression Ratio 9.1:1
  • Ignition Coil Near Plug Solid State Inductive
  • Cooling Type: Pressurized Closed | Closed Coolant Recovery System | UV/Ozone Resistant Hoses | Factory-Installed Radiator | 50/50 Ethylene Glycol Antifreeze | Radiator Drain Extension
  • Engine Power Horsepower at Rated kW: 98 hp | Single-Phase 120/240 VAC @1.0pf: 60 kW/60 kVA / 250 Amps | Three-Phase 120/208 VAC @0.8pf: 60 kW/75 kVA / 208 Amp | Three-Phase 120/240 VAC @0.8pf: 60 kW/75 kVA / 181 Amps | Three-Phase 277/480 VAC @0.8pf: 60 kW/75 kVA / 90 Amps | Three-Phase 346/600 VAC @0.8pf: 60 kW/75 kVA / 72 Amps
  • Intake Design Intake Air Method: Turbocharged
  • Governor Electronic

2025 Generac Mobile Stationary Generators SG060

Keep all your business’s essentials up and running with a Generac 60kW generator. Take advantage of a durable enclosure that utilizes the highest level of noise reduction and weather resistance. Generac is one of North America’s largest suppliers of power generation equipment. For more than five decades, Generac has designed and manufactured diesel, natural gas, and bi-fuel generators that meet the demands of any application.

Features may include:

Generator Enclosure
  • Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
Spark-Ignited Engine
  • Generac builds its spark-ignited engines from the block up utilizing advanced engineering expertise.
Industrial Alternator
  • Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
POWERMANAGER® Controller
  • Generac engineers its generator controls with safety and convenience as top priorities.

Engine

Engine Manufacturer Generac
Cylinder Liners 4
Engine Type In-Line
Displacement 270.4 in3 (4.43 L)
Bore 4.5 in (114.3 mm)
Stroke 4.25 in (107.95 mm)
Compression Ratio 9.1:1
Ignition Coil Near Plug Solid State Inductive
Cooling Type: Pressurized Closed | Closed Coolant Recovery System | UV/Ozone Resistant Hoses | Factory-Installed Radiator | 50/50 Ethylene Glycol Antifreeze | Radiator Drain Extension
Engine Power Horsepower at Rated kW: 98 hp | Single-Phase 120/240 VAC @1.0pf: 60 kW/60 kVA / 250 Amps | Three-Phase 120/208 VAC @0.8pf: 60 kW/75 kVA / 208 Amp | Three-Phase 120/240 VAC @0.8pf: 60 kW/75 kVA / 181 Amps | Three-Phase 277/480 VAC @0.8pf: 60 kW/75 kVA / 90 Amps | Three-Phase 346/600 VAC @0.8pf: 60 kW/75 kVA / 72 Amps
Intake Design Intake Air Method: Turbocharged
Governor Electronic

Fuel System

Fuel Type Natural Gas, Propane
Fuel System Control: Electronic | Shutoff: Generac | NPT Fuel Connection on Frame | Primary and Secondary Fuel Shutoff
Fuel Usage, 100% Load Natural Gas 25%: 231 scfh (6.5 m3/ghr) | Natural Gas 50%: 413 scfh (11.7 m3/hr) | Natural Gasd 75%: 601 scfh (17.0 m3/hr) | Natural Gas 100%: 795 (22.5 m3/hr) | Propane Vapor 25%: 64 scfh (1.8 m3/hr) | Pro´pane Vapor 50%: 152 scfh (4.3 m3/hr) | Propane Vapor 75%: 232 scfh (6.6 m3/hr) | Propane Vapor 100%: 306 scfh (8.7 m3/hr) | Propane Liquid 25%: 2.2 gph (8.3 Lph) | Propane Liquid 50%: 4.4 gph (16.6 Lph) | Propane Liquid 75%: 6.6 gph (24.9 lph) | Propane Liquid 100%: 8.8 gph (33.2 lph)

Battery

Battery Size: See Battery Index 0161970SBY | Voltage: 12 VDC
Battery Charger Input Standard

Electric

Electrical System Voltage: 12 VDC | Ground Polarity: Negative (-)
Alternator Standard Model: K0060124Y21 | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion (THD): <5% | Telephone Interference Factor (TIF): <50 | Standard Excitation: Synchronous Brushless | Bearings. Sealed Ball | Coupling: Direct via Flexible Disc | Voltage Regulator Type: Full Digital | Regulation Accuracy (Steady State): ±0.25% | UL2200 GENprotect™ | Class H Insulation Material | 2/3 Pitch | Skewed Stator | Brushless Excitation | Sealed Bearing | Full Load Capacity Alternator

Operational

Operating Conditions Frequency Regulation (Steady State): ±0.25
Operating Speed Fan: 2,100 RPM | Rated Engine: 1,800 RPM | Piston: 1,275 ft/min (389 m/min)
Operating Temperature, Maximum Maximum Operating Ambient Temperature: 122 °F (50 °C) | Maximum Operating Ambient Temperature (Before Derate): See Bulletin No. 0199270SSD | Exhaust Temp (Rated Output - Post Silencer): 1,338 °F (726 °C)

Hydraulics

Pump Type Oil: Gear Driven
Oil Filter Type: Full Flow Spin-On Cartridge
Hydraulic Flow Coolant Flow: 24 gpm (90 Lpm) | Exhaust Flow (Rated Output): 331 scfm (9.0 m3/min)
Airflow Air Flow (Fan Air Flow Across Radiator) - Open Set: 4,343 scfm (123 m3/min) | Flow at Rated Power: 136 cfm (3.9 m3/min)
Maximum Pressure Operating Fuel Pressure (NG): 5 - 14 in H2O (1.2 - 3.5 kPa) | Operating Fuel Pressure (LP): 7 - 14 in H2O (1.7 - 3.5 kPa) | Maximum Additional Radiator Backpressure: 0.5 in H2O (0.12 kPa) | BMEP: 162 psi (1,119 kPa) | Maximum Exhaust Back pressure: 0.75 inHg (2.54 kPa)

Dimensions

Dimensions Fan Diameter: 22 in (533 mm)
Length Open Set: 92.9 in (2,360 mm) | Level 0 Sound Attenuated Enclosure: 120.8 in (3,068 mm) | Level 1 Sound Attenuated Enclosure: 120.8 in (3,068 mm) | Level 2 Sound Attenuated Enclosure: 120.8 in (3,068 mm)
Width Open Set: 39.9 in (1,014 mm) | Level 0 Sound Attenuated Enclosure: 40.5 in (1,028 mm) | Level 1 Sound Attenuated Enclosure: 40.5 in (1,028 mm) | Level 2 Sound Attenuated Enclosure: 40.5 in (1,028 mm)
Height Open Set: 46.0 in (1,170 mm) | Level 0 Sound Attenuated Enclosure: 69.0 in (1,754 mm) | Level 1 Sound Attenuated Enclosure: 69.0 in (1,754 mm) | Level 2 Sound Attenuated Enclosure: 69.0 in (1,754 mm)

Capacities

Oil capacity Engine: 21 qt (20 L)
Cooling System Coolant Capacity: 9 gal (34 L)

Weights

Weight Open Set: 1,923 - 2,094 lbs (872 - 950 kg) | Level 0 Sound Attenuated Enclosure Steel: 2,662 - 2,834 lbs (1,207 - 1,286 kg) | Level 0 Sound Attenuated Enclosure Aluminum: 2,310 - 2,483 lbs (1,048 - 1,126 kg) | Level 1 Sound Attenuated Enclosure Steel: 2,753 - 2,925 lbs (1,249 - 1,327 kg) | Level 1 Sound Attenuated Enclosure Aluminum: 2,401 - 2,573 lbs (1,089 - 1,167 kg) | Level 2 Sound Attenuated Enclosure Steel: 2,831 - 3,003 lbs (1,284 - 1,362 kg) | Level 2 Sound Attenuated Enclosure Aluminum: 2,458 - 2,630 lbs (1,115 - 1,193 kg)

Features

Features Number of Main Bearings: 5 | Lifter Type: Hydraulic Roller | Fan Type: Pusher | Oil Drain Extension | Heavy Duty Air Cleaner | Level 1 Fan and Belt Guards (Open Set Only) | Factory Filled Oil and Coolant | Critical Silencer | Oil Temperature Sender with Alarm | Air Filter Restriction Indicator | Battery Charging Alternator | Battery Cables | Battery Tray | Solenoid Activated Starter Motor | Internal Genset Vibration Isolation | Separation of Circuits - High/Low Voltage | Separation of Circuits - Multiple Breakers | Wrapped Exhaust Piping | Standard Factory Testing
Construction Material Connecting Rods: Forged Steel, Fractured Split, Bushingless | Cylinder Head. Cast Iron | Cylinder Liners: Cast Iron | Piston Type: Cast Aluminum Flat Top | Crankshaft Type. Forged Steel | Intake Valve Material: Stainless Steel | Exhaust Valve Material: Stainless Steel | Hardened Valve Seats: High Steel Iron Alloy | Stainless Steel Flexible Exhaust Connection | Rubber-Booted Engine Electrical Connections

Warranty

Warranty 2 Year Limited Warranty (Standby and Demand Response Rated Units)

Product Photography