2025 Generac Mobile Stationary Generators SG130
- Year 2025
- Make Generac Mobile
- Model Stationary Generators
2025 Generac Mobile Stationary Generators SG130
2025 Generac Mobile Stationary Generators SG130
Keep all your business’s essentials up and running with a Generac 130kW generator. Take advantage of a durable enclosure that utilizes the highest level of noise reduction and weather resistance. All of our industrial gas generators are completely cost effective and give you the best value for the output so you can afford more of what you need for your business. Generac is one of North America’s largest suppliers of power generation equipment. For more than five decades, Generac has designed and manufactured diesel, natural gas, and bi-fuel generators that meet the demands of any application.
Features may include:
Generator Enclosure- Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
- Generac builds its spark-ignited engines from the block up utilizing advanced engineering expertise.
- Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
- Generac engineers its generator controls with safety and convenience as top priorities.
- Generac's Modular Power Systems (MPS) boast a rate of up to 99.999% reliability, and are more cost-effective and flexible than single generators with the same load capacity.
Engine
Engine Manufacturer
Generac
Cylinder Liners
8
Engine Type
V
Displacement
540 in3 (8.9 L)
Bore
4.49 in (114.3 mm)
Stroke
4.25 in (107.95 mm)
Compression Ratio
10.5:1
Ignition
High Energy
Cooling
Type: Pressurized Closed | Closed Coolant Recovery System | UV/Ozone Resistant Hoses | Factory-Installed Radiator | 50/50 Ethylene Glycol Antifreeze | Radiator Drain Extension
Engine Power
Horsepower at Rated kW: 200 hp | Single-Phase 120/240 VAC @1.0pf: 130 kW/130 kVA / 542 Amps | Three-Phase 120/208 VAC @0.8pf: 130 kW/163 kVA / 451 | Three-Phase 120/240 VAC @0.8pf: 130 kW/163 kVA / 391 Amps | Three-Phase 277/480 VAC @0.8pf: 130 kW/163 kVA / 195 Amps | Three-Phase 346/600 VAC @0.8pf: 130 kW/163 kVA / 156 Amps
Governor
Electronic
Fuel System
Fuel Type
Natural Gas, Propane Vapor/ Liquid
Fuel System
Carburator: Down Draft | Fuel Line - NPT Connection | Primary and Secondary Fuel Shutoff
Fuel Usage, 100% Load
Natural Gas 25%: 378 ft3/hr (10.7 m3/hr) | Natural Gas 50%: 791.2 ft3/hr (22.4 m3/hr) | Natural Gas 75%: 1,144.5 ft3/hr (32.4 m3/hr) | Natural Gas 100%: 1,496.0 ft3/hr (42.4 m3/hr) | Propane Vapor 25%: 204.2 ft3/hr (5.8 m3/hr) | Propane Vapor 50%: 341.8 ft3/hr (9.7 m3/hr) | Propane Vapor 75%: 470.0 ft3/hr (13.3 m3/hr) | Propane Vapor 100%: 593.7 ft3/hr (16.8 m3/hr) | Propane Liquid 25%: 5.7 gaql/h4 | Propane Liquid 50%: 9.54 gal/hr | Propane Liquid 75%: 13.12 gal/hr | Propane Liquid 100%: 16.57 gal/hr
Intake Design
Intake Air Method: Turbocharged/Aftercooled
Battery
Battery
Size. See Battery Index 0161970SBY | Voltage: 12 VDC
Battery Charger Input
Battery Charger Alternator: Standard
Electric
Electrical
System Voltage: 12 VDC | Ground Polarity: Negative
Alternator
Standard Model: Generac 520 | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% | Telephone Interference Factor (TIF): <50 | Standard Excitation. Brushless | Bearings: Single Sealed | Coupling: Direct via Flexible Disc | Voltage Regulator Type: Full Digital | Number of Sensed Phases: 3 | Regulation Accuracy (Steady State): ±0.25% | GENprotect™ | Class H Insulation Material | 2/3 Pitch | Skewed Stator | Brushless Excitation | Sealed Bearing | Amortisseur Winding | Full Load Capacity Alternator
Operational
Operating Conditions
Frequency Regulation (Steady State). ±0.25%
Operating Speed
Fan: 2,330 RPM | Piston: 1,275 ft/min
Operating Temperature, Maximum
Exhaust Temp (Rated Output - Post Silencer): 1,112 °F (600 °C)
Hydraulics
Pump Type
Oil: Gear Driven
Oil Filter
Type: Full-Flow Spin-On Cartridge
Hydraulic Flow
Water Pump Flow: 26 gal/min | Coolant Flow per Minute: 26 gal/min (98 L/min)
Airflow
Air Flow (inlet air combustion and radiator): 5,757 ft3/min (163.0 m3/min) | Flow at Rated Power: 349 cfm (9.9 m3/min) | Exhaust Flow (Rated Output): 1,341 cfm (38.0 m3/min)
Maximum Pressure
Operating Fuel Pressure (NG/LPV): 7”-11” H2O | Maximum Radiator Backpressure: 0.5 in H2O (0.12 kPa) | BMEP: 162 psi | Maximum Exhaust Backpressure;: 0.75 inHg (2.54 kPa)
Dimensions
Dimensions
Fan Diameter: 22 in (558 mm) | Exhaust Size Outlet: 3.0" ID Flex (No Silencer)
Length
Open Set: 110 in (2,795 mm) | Standard Enclosure: 132.72 in (3,371.1 mm) | Level 1 Acoustic Enclosure: 154.13 in(3,914.9 mm) | Level 2 Acoustic Enclosure: 144.53 in (3,671 mm)
Width
Open Set: 39.4 in (1,000.2 mm) | Standard Enclosure: 40.46 in (1,027.8 mm) | Level 1 Acoustic Enclosure: 40.46 in (1,027.8 mm) | Level 2 Acoustic Enclosure: 40.46 in (1,027.8 mm)
Height
Open Set: 54.3 in (1,378 mm) | Standard Enclosure: 64.05 in (1,627 mm) | Level 1 Acoustic Enclosure: 64.05 in (1,627 mm) | Level 2 Acoustic Enclosure: 80.88 in (2,054.3 mm)
Capacities
Oil capacity
Crankcase: 8.0 qts (8.5 L)
Cooling System
Coolant Capacity: 6.0 gal (22.7 L)
Weights
Weight
Open Set: 2,674 lbs (1,213 kg) | Standard Enclosure Steel: 3,434 lbs (1,558 kg) | Standard Enclosure Aluminum: 3,055 lbs (1,386 kg) | Level 1 Acoustic Enclosure Steel: 3,670 lbs (1,665 kg) | Level 1 Acoustic Enclosure Aluminum: 3,157 lbs (1,432 kg) | Level 2 Acoustic Enclosure Steel: 3,789 lbs (1,719 kg) | Level 2 Acoustic Enclosure Aluminum: 3,207 in (1,455 mm)
Features
Features
Number of Main Bearings: 5 | Connecting Rods: Forged | Lifter Type: Hydraulic Roller | Fan Type: Pusher | Oil Drain Extension | Air Cleaner | Fan Guard | Factory Filled Oil and Coolant | Radiator Duct Adapter (Open Set Only) | Critical Exhaust Silencer | Battery Charging Alternator | Battery Cables | Battery Tray | Solenoid Activated Starter Motor | Internal Genset Vibration Isolation | Separation of Circuits - High/Low Voltage | Separation of Circuits - Multiple Breakers | Wrapped Exhaust Piping | Standard Factory Testing | Silencer Mounted in the Discharge Hood (Enclosed Only)
Construction Material
Cylinder Head: Cast Iron | Piston Type: Aluminum Alloy | Crankshaft Type: Forged Steel | Intake Valve Material: Steel Alloy | Exhaust Valve Material: Stainless Steel | Stainless Steel Flexible Exhaust Connection | Rubber-Booted Engine Electrical Connections
Warranty
Warranty
2 Year Limited Warranty (Standby Rated Units)