2025 Generac Mobile Stationary Generators SG150-9-0
- Year 2025
- Make Generac Mobile
- Model Stationary Generators
2025 Generac Mobile Stationary Generators SG150-9-0
2025 Generac Mobile Stationary Generators SG150-9-0
As electrical grid outages become more common it is important to be prepared for the potential of a power outage. Keep all your business’s essentials up and running with Generac's 9.0L 150kW generator. Our rugged natural gas generators give you all the backup power you need until grid power is restored. All of our industrial gas generators are completely cost effective and give you the best value for the output so you can afford more of what you need for your business. Generac is one of North America’s largest suppliers of power generation equipment. For more than five decades, Generac has designed and manufactured diesel, natural gas, and bi-fuel generators that meet the demands of any application.
Features may include:
Generator Enclosure- Generac manufactures its own enclosures, ensuring each unit combines the highest level of durability, noise reduction, weather resistance, and streamlined design.
- Generac builds its spark-ignited engines from the block up utilizing advanced engineering expertise.
- Generac industrial alternators are machine wound, machine inserted, and machine varnished for the ultimate in consistency.
- Generac engineers its generator controls with safety and convenience as top priorities.
- Generac's Modular Power Systems (MPS) boast a rate of up to 99.999% reliability, and are more cost-effective and flexible than single generators with the same load capacity.
Engine
Engine Manufacturer
Generac
Cylinder Liners
8
Engine Type
V
Displacement
543 in3 (8.9 L)
Bore
4.49 in (114.3 mm)
Stroke
4.25 in (108 mm)
Compression Ratio
G18: 10.5:1 | G26: 9.1:1
Ignition
High Energy
Cooling
Type: Pressurized Closed | Closed Coolant Recovery System | UV/Ozone Resistant Hoses | Factory-Installed Radiator | 50/50 Ethylene Glycol Antifreeze | Radiator Drain Extension
Engine Power
Horsepower at Rated kW: 229 hp | Natural Gas (G18, G26) Single-Phase 120/240 VAC @ 1.0pf: 144 kW/144 kVA, 600 Amps | Natural Gas 8G18, G26) Three-Phase 120/208 VAC @0.8pf: 150 kW/188 kVA, 521 Amps | Natural Gas (G18, G26) Three-Phase 120/240 VAC @0.8pf: 150 kW/188 kVA, 452 Amps | Natural Gas (g18, g26) Three-Phase 277/480 VAC @0.8pf: 150 kW/188 kVA, 226 Amps | Natural Gas (G18, G26) Three-Phase 346/600 VAC @0.8pf: 150 kW/188 kVA, 181 Amps | Propane/Dual Fuel (G18, G26) Single-Phase 120/240 VAC @ 1.0pf: 134 kW/134 KVA, 558 Amps | Propane/Dual Fuel (G18, G26) Three-Phase 120/208 VAC @0.8pf: 140 kW/175 kVA, 486 Amps | Propane/Dual Fuel Three-Phase 120/240 VAC @0.8pf: 140 kW/175 kVA, 422 Amps | Propane/Dual Fuel Three-Phase 277/480 VAC @0.8pf: 140 kW/175 kVA, 211 Amps | Propane/Dual Fuel Three-Phase 346/600 VAC @0.8pf: 140 kW/175 kVA, 169 Amps
Governor
Electronic
Intake Design
Intake Air Method: Turbocharged/Aftercooled
Fuel System
Fuel Type
Natural Gas, Propane Vapor/ Liquid
Fuel System
Carburetor: Down Draft | NPT Fuel Connection on Frame | Primary and Secondary Fuel Shutoff
Fuel Usage, 100% Load
Natural Gas 25%: 668 scfh (18.9 m3/hr) | Natural Gas 50%: 1,127 scfh (31.9 m3/hr) | Natural Gas 75%: 1,583 scfh (44.8 m3/hr) | Natural Gas 100%: 2,042 scfh (57.8 m3/hr) | Propane Vapor 25%: 280 scfh (7.9 m3/hr) | Propane Vapor 50%: 430 scfh (12.2 m3/hr) | Propane Vapor 75%: 573 scfh (16.2 m3/hr) | Propane Vapor 100%: 720 scfh (20.4 m3/hr) | Propane Liquid 25%: 6.7 gal/hr (25.4 Lph) | Propane Liquid 50%: 11.4 gal/hr (43.2 Lph) | Propane Liquid 75%: 15.7 gal/hr (59.4 Lph) | Propane Liquid 100%: 20.0 gal/hr (75.7 Lph)
Battery
Battery
Size: See Battery Index 0161970SBY | Voltage: 12 VDC
Electric
Electrical
System Voltage: 12 VDC | Ground Polarity: Negative
Alternator
Standard Model: K0150124Y26 | Poles: 4 | Field Type: Revolving | Insulation Class - Rotor: H | Insulation Class - Stator: H | Total Harmonic Distortion: <5% | Telephone Interference Factor (TIF): <50 | Standard Excitation: Permanent Magnet | Bearings: Single Sealed Ball | Coupling: Direct Drive | Voltage Regulator Type: Full Digital | Regulation Accuracy (Steady State): ±0.25% | UL2200 GENprotect™ | Class H Insulation Material | 2/3 Pitch | Skewed Stator | Permanent Magnet Excitation | Sealed Bearings | Amortisseur Winding | Full Load Capacity Alternator
Operational
Operating Conditions
Frequency Regulation (Steady State): ±0.25%
Operating Speed
Fan (G18 /G26): 2,330 RPM / 2,386 RPM | Rated Engine: 1,800 RPM | Piston: 1,275 ft/min (389 m/min)
Operating Temperature, Maximum
Maximum Operating Air Temperature on Radiator: 122 °F (50 °C) | Maximum Operating Ambient Temperature (Before Derate): See Bulletin 0199270SSD | Exhaust Temp (Rated Output - Post Silencer): 1,440 °F (782 °C)
Hydraulics
Pump Type
Oil: Gear Driven
Oil Filter
Type: Full-Flow Spin-On Cartridge
Hydraulic Flow
Coolant Flow: 27.5 gpm (104 Lpm)
Airflow
Air Flow (Fan Air Flow Across Radiator): 5,598 cfm (158.5 m3/min) | Flow at Rated Power: 343 cfm (9.7 m3/min) | Exhaust Flow (Rated Output): 1,206 cfm (34.1 m3/min)
Maximum Pressure
Operating Fuel Pressure: 7 - 11 in H2O (1.7 - 2.7) | Maximum Radiator Backpressure: 0.5 in H2O (0.12 kPa) | BMEP: 185 psi (1,277 kPa) | Maximum Exhaust Backpressure: 0.75 inHg (2.54 kPa)
Dimensions
Dimensions
Fan Diameter: 22 in (559 mm)
Length
Open Set (Includes Exhaust Flex): 116.5 in (2,959 mm) | Weather Protected Enclosure: 143.0 in (3,631 mm) | Level 1 Acoustic Enclosure: 168.5 in (4,280 mm) | Level 2 Acoustic Enclosure: 142.9 in (3,630 mm)
Width
Open Set (Includes Exhaust Flex): 49.7 in (1,262 mm) | Weather Protected Enclosure: 50.4 in (1,280 mm) | Level 1 Acoustic Enclosure: 50.4 in (1,280 mm) | Level 2 Acoustic Enclosure: 50.4 in (1,280 mm)
Height
Open Set (Includes Exhaust Flex): 55.6 in (1,412 mm) | Weather Protected Enclosure: 68.2 in (1,732 mm) | Level 1 Acoustic Enclosure: 68.2 in (1,732 mm) | Level 2 Acoustic Enclosure: 91.7 in (2,329 mm)
Capacities
Oil capacity
Crankcase Capacity (G18 / G26): - 8.5 qt (8.0 L) / 9.5 qt (10.0 L)
Cooling System
Coolant Capacity: 6.3 gal (24.0 L)
Weights
Weight
Open Set (Includes Exhaust Flex): 2,946 lbs (1,336 kg) | Weather Protected Enclosure Steel: 3,843 lbs (1,743 kg) | Weather Protected Enclosure Aluminum: 3,384 lbs (1,535 kg) | Level 1 Acoustic Enclosure Steel: 4,131 lbs (1,874 kg) | Level 1 Acoustic Enclosure Aluminum: 3,157 lbs (1,432 kg) | Level 2 Acoustic Enclosure Steel: 4,323 lbs (1,961 kg) | Level 2 Acoustic Enclosure Aluminum: 3,594 lbs (1,630 kg)
Features
Features
Number of Main Bearings: 5 | Lifter Type: Hydraulic Roller | Fan Type: Pusher | Oil Drain Extension | Air Cleaner | Fan Guard | Factory Filled Oil and Coolant | Radiator Duct Adapter (Open Set Only) | Critical Silencer/Catalyst | Battery Charging Alternator | Battery Cables | Battery Tray | Rubber-Booted Engine Electrical Connections | Solenoid Activated Starter Motor | Internal Genset Vibration Isolation | Separation of Circuits - High/Low Voltage | Separation of Circuits - Multiple Breakers | Wrapped Exhaust Piping | Standard Factory Testing | Silencer Mounted in the Discharge Hood (Enclosed Only)
Construction Material
Connecting Rods: Forged Steel | Cylinder Head: Cast Iron | Piston Type: Aluminum Alloy | Crankshaft Type: Forged Steel | Intake Valve Material: Steel Alloy | Exhaust Valve Material: Stainless Steel | Stainless Steel Flexible Exhaust Connection
Warranty
Warranty
2 Year Limited Warranty (Standby Rated Units)